Serving San Antonio Metro

Those Rust Stains on Your Chimney? They Start at the Top.

Chimney chase cover replacement in San Antonio. If your chimney is framed and sided rather than solid brick, the metal cover on top is what keeps water out, and the builder-grade one is probably rusting through right now. We replace it with sloped stainless or copper that sheds water and never streaks. Free estimates, on-site if needed, backed by a 3-year warranty.

Top Rated by San Antonio Residents
Trusted across the metro - quality that speaks for itself
3-Year Workmanship Warranty
Every job backed in writing - no fine print
Certified & Insured Technicians
Free estimates, on-site if needed - no service call fee
skip the call and book online

Get a Free Quote

No commitment · No service call fee · Same-day available

Contact Form

We never share your information

Chimney Chase Cover Replacement · San Antonio

If your chimney is boxed and sided, a rusting metal lid is all that's protecting it.

Not every chimney is solid brick. Many homes have a factory-built chimney, a wood-framed "chase" wrapped in siding, and the flat metal cover on top is called the chase cover. It's the framed chimney's version of a crown, and it's the only thing keeping rain out of the wood structure underneath.

The problem is that most builders install cheap galvanized covers that rust, sag, and pool water within a few years. Standing water eats through the metal, then pours straight into the framing, and those orange streaks down your siding are the first warning.

Sloped to Shed, Not Pool

A proper cover is cross-broken so water runs off instead of collecting in the middle and rusting through.

Stainless or Copper, Not Rust-Prone Steel

We replace builder-grade galvanized with materials that don't corrode, so it never streaks your siding again.

Custom-Measured to Your Chase

Built to your exact dimensions and installed by certified & insured technicians, backed in writing.

Call (726) 259-1693
Chimney chase cover replacement in San Antonio, TX, MockingBird Chimney
Prefab
Framed chimneys have a cover, not a crown
#1
Rust streaks are the top warning sign
Custom
Every cover measured and built to fit
$0
Chase cover estimate, on-site free if needed
Rust never sleeps. Once the cover pools water, it's on a countdown to leaking into the framing below.
Chase Cover Replacement Across San AntonioAlamo HeightsStone OakHelotesLeon ValleyConverseUniversal CityLive OakSchertzCiboloSelmaBoerneFair Oaks RanchBulverdeSpring BranchNew BraunfelsSeguinCastrovilleFloresvillePleasanton Chase Cover Replacement Across San AntonioAlamo HeightsStone OakHelotesLeon ValleyConverseUniversal CityLive OakSchertzCiboloSelmaBoerneFair Oaks RanchBulverdeSpring BranchNew BraunfelsSeguinCastrovilleFloresvillePleasanton
Cheap Now, Costly Later

Why the Original Cover Always Fails

Builders install the cheapest cover that passes inspection. Here is exactly how that decision comes back to leak into your framing, usually right on schedule.

Failure 01

It Pools Water

Flat, un-sloped covers sag in the middle and hold standing water instead of shedding it off the edges

Failure 02

It Rusts Through

Cheap galvanized steel corrodes from that standing water until pinholes, then open rust holes, form

Failure 03

It Streaks Your Siding

Rust runoff bleeds orange stains down the chase and siding, the eyesore neighbors notice first

Failure 04

It Leaks Into the Framing

Once it's rusted through, water pours into the wood chase, rotting framing and reaching your ceiling

Failure 05

It Never Fit Right

Generic covers with loose seams and wrong-size collars let water in around the edges from day one

Every one of these is designed out of a proper stainless or copper cover. Replace it once, and it's the last one you'll ever buy.

Swipe to explore

You Can Spot Most of These From the Yard

Signs Your Chase Cover Needs Replacing

A failing chase cover doesn't hide. It announces itself on your siding and, eventually, inside your home. Recognize any of these? The estimate is free.

Orange Rust Streaks on the Siding

The telltale sign. Rusty water runoff bleeding down from the top of the chimney means the metal cover is corroding and washing rust onto everything below it.

Standing Water or a Sagging Top

If you can see the cover dips in the middle or holds a puddle after rain, it's pooling water instead of shedding it and rusting from the inside out.

Visible Rust, Holes, or Pitting

Rust spots, flaking metal, or actual pinholes on the cover mean it's already failed. Every hole is a direct path for water into the framing.

Water or Stains Inside

Damp spots, stains, or a musty smell near the fireplace or on the ceiling below the chimney mean water has already made it through into the chase.

Loose, Lifting, or Rattling Metal

A cover that flexes, lifts at the edges, or rattles in the wind was never sealed right. Those gaps let water in around the seams, not just through rust.

It's the Original Galvanized One

If your framed chimney still wears its builder-installed cover, it's almost certainly thin galvanized steel on borrowed time. They aren't built to last, and they don't.

A new cover is a one-time fix. A rusted one keeps feeding water into wood framing, where the repair bill multiplies fast.

Get My Free Chase Cover Estimate
Built to Outlast the House

Covers That Never Rust Again

Custom-measured, cross-broken to shed water, and made from stainless or copper. The last chase cover your chimney will need.

New custom chimney chase cover installed by MockingBird Chimney, San Antonio
New Chase CoverCustom-fit and sloped to shed every drop
Chase cover with cap and shroud on a framed chimney, San Antonio
Cover, Collar & CapThe full top rebuilt as one sealed system
Finished chimney top after chase cover replacement, San Antonio
Sealed & WatertightNo pooling, no rust, no streaks
Chimney top restoration and chase cover work, San Antonio
Clean, Finished TopA chimney top that protects and looks the part

Every cover is measured to your exact chase and documented, so it fits right and sheds water for good.

Made for Your Chimney, Not a Shelf

How We Replace a Chase Cover

A chase cover isn't a stock part you grab off a rack. It's measured and built for your exact chimney. Here's how it goes.

1

Measure the Chase Exactly

We take precise measurements of your chase top and every flue and collar that passes through it. A chase cover only seals if it's built to the right dimensions. Call (726) 259-1693 or send the form for a free estimate.

2

Fabricate It in Stainless or Copper

Your cover is custom-made from corrosion-proof stainless or copper, cross-broken so it slopes and sheds water, with collars sized to your flues. You choose the material, we build it to fit, no thin galvanized, no guesswork.

3

Remove the Old, Seal in the New

Out comes the rusted cover, and the new one is fitted, fastened, and sealed at the seams and collars so water can't sneak in around the edges. We check the cap and shroud on top while we're up there too.

4

Watertight & Warrantied

No more pooling, no more rust, no more streaks down your siding, for good. Installed by certified & insured technicians, documented for your records, and backed by our 3-year workmanship warranty in writing.

Why Homeowners Have Us Replace It

Buy the Last Cover Your Chimney Needs

The builder bought the cheapest one. We build the one you'll never have to think about again.

Stainless or Copper, Never Galvanized

We build in corrosion-proof materials that don't rust, sag, or streak, not the thin galvanized steel builders use to save a few dollars up front.

Custom-Measured to Fit

Every cover is fabricated to your exact chase and flue sizes, cross-broken to shed water. No generic cover forced to fit where it doesn't.

The Whole Top, One Job

Cover, collars, and cap sealed as a system. We handle the entire chimney top so there's no weak link left for water to find.

Certified, Insured & Warrantied

All work by certified & insured technicians, backed by a 3-year workmanship warranty in writing. If it ever fails us, we come back and make it right.

Protected, Year After Year

Done Once, Done Right

 Real feedback from San Antonio homeowners

"We actually got referred to this company by the previous owners when we bought our house, and they've been our go-to ever since. We do our annual maintenance checks with them every year to keep things safe, and they handle the full cleaning every few years when it's due. It's peace of mind knowing you have a reliable team you can trust year after year."

J
Juan
Ongoing Upkeep

"I can't thank these guys enough. We noticed water staining on our ceiling after a heavy storm and panicked thinking about the repair costs. They came out the exact same day, diagnosed the chimney leak immediately, and had it completely fixed within 24 hours. If we had waited, we'd have been looking at tens of thousands in ceiling and flooring damage. Truly saved our home and our wallets."

E
Erica
Water Damage Repair

"Solid experience from start to finish. Incredibly fast to respond, showed up right on time, and clearly knew exactly what they were doing, very knowledgeable crew. On top of the expertise, their pricing was highly affordable compared to the rates you see everywhere else these days. If you want a quick, smart, and reasonably priced chimney service, just call them."

M
Marcus T.
Chimney Service

"Awesome service! I needed my chimney cap replaced and was bracing myself for a massive bill, but I was so happy with the price they gave me. The tech was super nice, got the new cap installed quickly, and left everything totally clean. Great quality work that didn't break the bank. Will definitely use them again!"

C
Chloe
Cap Replacement

"So glad I found this company! I had a super frustrating leak coming from my chimney, so I spent a couple of days shopping around and getting quotes. I chose them because their pricing was fantastic and they just felt the most honest. They came out, gave a fast fix, and didn't try to upsell me on stuff I didn't need. The whole process was completely stress-free!"

B
Brett
Masonry & Water Fix

"We actually got referred to this company by the previous owners when we bought our house, and they've been our go-to ever since. We do our annual maintenance checks with them every year to keep things safe, and they handle the full cleaning every few years when it's due. It's peace of mind knowing you have a reliable team you can trust year after year."

J
Juan
Ongoing Upkeep

"I can't thank these guys enough. We noticed water staining on our ceiling after a heavy storm and panicked thinking about the repair costs. They came out the exact same day, diagnosed the chimney leak immediately, and had it completely fixed within 24 hours. If we had waited, we'd have been looking at tens of thousands in ceiling and flooring damage. Truly saved our home and our wallets."

E
Erica
Water Damage Repair

"Solid experience from start to finish. Incredibly fast to respond, showed up right on time, and clearly knew exactly what they were doing, very knowledgeable crew. On top of the expertise, their pricing was highly affordable compared to the rates you see everywhere else these days. If you want a quick, smart, and reasonably priced chimney service, just call them."

M
Marcus T.
Chimney Service

"Awesome service! I needed my chimney cap replaced and was bracing myself for a massive bill, but I was so happy with the price they gave me. The tech was super nice, got the new cap installed quickly, and left everything totally clean. Great quality work that didn't break the bank. Will definitely use them again!"

C
Chloe
Cap Replacement

"So glad I found this company! I had a super frustrating leak coming from my chimney, so I spent a couple of days shopping around and getting quotes. I chose them because their pricing was fantastic and they just felt the most honest. They came out, gave a fast fix, and didn't try to upsell me on stuff I didn't need. The whole process was completely stress-free!"

B
Brett
Masonry & Water Fix
Stainless & Copper, Built to Last

Stop the Rust. Replace It Once.

Free chase cover estimate, on-site if needed · Custom-measured stainless or copper · All work by certified & insured technicians · 3-year workmanship warranty · Serving the greater San Antonio metro

Chase Cover Questions

Chase Cover FAQ

Straight answers about the metal top most homeowners don't know they have.

It's the flat metal top on a factory-built chimney. If your chimney is a boxed-in structure wrapped in siding rather than solid brick, the metal lid covering that box is the chase cover. It does the same job a concrete crown does on a masonry chimney, keeps water out of everything below, and the cap sits on top of it.
Look at your chimney. If it's brick or stone all the way up, you have a masonry chimney with a crown. If it's a squared-off box covered in siding, stucco, or paneling, it's a framed chimney, and the metal top on it is a chase cover. If you're seeing rust streaks running down that siding, it's a chase cover that's failing.
Not galvanized, that's the thin steel builders use, and it's exactly what's rusting on your chimney now. Stainless steel is the sweet spot: strong, corrosion-proof, and long-lasting at a fair price. Copper is the premium choice, it never rusts and develops a beautiful patina, ideal if you want the look. We'll walk you through both at the estimate.
It depends on the size of your chase, the number of flues, and whether you choose stainless or copper, since each cover is custom-fabricated to fit. It costs more than a cheap galvanized replacement, but it's the last one you'll ever buy. The estimate is free, so you get a real number with no obligation and no service call fee.
A properly built stainless or copper cover can outlast the roof, decades, because it doesn't corrode the way galvanized does. That's the whole point: replace the builder-grade one once with the right material, and you stop the rust-and-replace cycle for good. Our work is backed by a 3-year workmanship warranty in writing.
Paint hides the stain for a season, but it doesn't fix what's underneath. Once a galvanized cover has rusted and started pooling water, the metal is compromised and thinning out, and paint won't stop water that's already finding its way through. Replacing it is the only real fix, and it ends the streaks permanently instead of masking them.
The chase cover is the metal top on a framed chimney. The crown is the concrete equivalent on a masonry chimney. The cap is the smaller cover over the flue opening, which sits on top of either one. A framed chimney needs a chase cover and a cap working together, and we install both.
A rusted chase cover is a common source, but water inside can come from a few places, so we'll confirm it before replacing anything. If you're seeing active stains or drips, start on our leak repair page so we trace the real source first, active leaks get priority scheduling.

Still have a question? Ask us directly, we pick up.

Scroll to Top